HOME > 3차원 측정기 사업(제품) > 프로브 시스템
AEH CMM은 Renishaw 프로브 시스템을 사용합니다.
수동 프로브 헤드
 
▣ Compatible with TP2, TP6, TP20, TP200
▣ A-axis indexing, 0° to 90° in 15° repeatable steps
▣ B-axis indexing, ±180° in 15° repeatable steps
▣ Maximum Extension Bar, 50mm
 
 
▣ Compatible with TP2, TP6, TP20, TP200
▣ Compatible with TP6A, TP7M, SP25M and SP600M
▣ A-axis indexing, 0° to 105° in 7.5° steps
▣ B-axis indexing, ±180° in 7.5° steps
▣ Maximum Extension Bar, 300mm
 
 
MH20
▣ Compatible with TP20
▣ A-axis indexing, Non-indexing swivel ±93°
▣ B-axis indexing, Non-indexing swivel ±300°
▣ Maximum Extension Bar, 75 mm
MH20i
▣ Compatible with TP20
▣ A-axis indexing, 0° to 90° in 15° repeatable steps
▣ B-axis indexing, Non-indexing swivel ±300°
▣ Maximum Extension Bar, 75 mm
 
자동 프로브 헤드
 
▣ Compatible with TP2, TP6, TP20, TP200
▣ Compatible with TP6A, TP7M, SP25M and SP600M
▣ A-axis indexing, 0° to 105° in 7.5° steps
▣ B-axis indexing, ±180° in 7.5° steps
▣ Maximum Extension Bar, 450mm using PAACF special order only extension
 
 
▣ Compatible with TP2, TP6, TP20, TP200
▣ A-axis indexing, 0° to 105° in 7.5° steps
▣ B-axis indexing, ±180° in 7.5° steps
▣ Maximum Extension Bar, 300mm
 
 
▣ Compatible with TP2, TP6, TP20, TP200
▣ Compatible with TP6A, TP7M, SP25M and SP600M
▣ A-axis indexing, 0° to 105° in 7.5° steps
▣ B-axis indexing, ±180° in 7.5° steps
▣ Maximum Extension Bar, 450mm using PAACF special
order only extension
 
5축 프로브 시스템
 
▣ High performance 5-axis measurement
▣ Fastest Scanning and discrete point measurement
▣ Eliminate measurement bottlenecks
▣ Unparalled flexibility
▣ Gasket scan, Sweep scan, Circle scan, Helix scan, Head touches
 
 
▣ Integral industry standard TP20 probe
▣ 5-axis touch trigger system
▣ Easy access to feature at any angle
▣ Faster calibration
▣ Improved touch-trigger metrology performance
 
접촉 프로브
 
▣ Sense direction, 5-axis: ±X, ±Y, +Z
▣ Unidirection repeatability maximum, ±0.35 um(SF)
▣ Stylus range, M2
▣ Maximum extension on PH10 series, 300 mm
▣ Mounting method, M8 thread,
▣ Maximum recommended stylus length, 60 mm GF
 
 
▣ Sense direction, 6-axis: ±X, ±Y, ±Z
▣ Unidirection repeatability maximum, Trigger level 1: 0.40 um, Trigger level 2: 0.50 um
▣ Stylus range, M2
▣ Maximum extension on PH10 series, 300 mm
▣ Mounting method, M8 thread,
▣ Maximum recommended stylus length, 50 mm steel - 100 mm GF
 
 
▣ Sense direction, 6-axis: ±X, ±Y, ±Z
▣ Unidirection repeatability maximum, Trigger level 1: 0.25 um, Trigger level 2: 0.25 um
▣ Stylus range, M4
▣ Maximum extension on PH10 series, 200 mm
▣ Maximum recommended stylus length, 150 mm steel - 180 mm GF
 
스캐닝 프로브
 
▣ Measurement range, ±0.5 mm (in X, Y and Z)
▣ Probe attributes, 3-axis analogue measurement
▣ Stylus range, M3
▣ Mounting method, Multiwired autojoint
▣ Maximum stylus length, 400mm(SM25-4)
 
 
▣ Measurement range, 3 axis measurement: ±2.5 mm (in PX, PY and PZ)
▣ Probe attributes, Ultra-high scanning accuracy scanning
probe with 3-axis analogue measurement (±PX, ±PY, ±PZ)
▣ Spring rate, Approx. 1.8 N/mm in X, Y and Z
▣ Stylus range, M5
▣ Maximum stylus length, 800mm
 
 
▣ Measurement range, ±1 mm (X, Y, Z)
▣ Probe attributes, 3-axis measurement (X, Y, Z) linear and parallel motion in all axes
▣ Spring rate, 1.2 N/mm nominal (X, Y and Z)
▣ Stylus range, M4
▣ Maximum stylus length, 300mm